概观
Chvac 快速准确地计算商业建筑的最大供暖和制冷负荷。 冷负荷可以使用 CLTD 方法或新的 RTS(辐射时间序列)方法来计算。 该计划允许无限数量的房间,可以分为多达 100 个空气处理系统。 Chvac 自动查找计算负载所需的所有冷却负载和修正系数。 此外,它还可以查找全球 2000 多个城市的户外设计天气数据。 还可以编辑天气数据以及添加其他城市的数据。 综合报告列出了一般项目数据、详细的房间负荷、空气处理机汇总负荷、外部空气负荷、总建筑负荷、建筑围护结构分析、吨位要求、CFM 空气量、冷冻水流量(如果适用)以及完整的湿度数据进入和离开线圈的条件。 其他突出的功能包括 ASHRAE 标准 62 分析、自动建筑旋转、360 度墙壁方向、倾斜玻璃、外部遮阳、内部操作负载曲线、可变的室内设计温度、人员多样性、预处理的室外空气、季节性渗透和通风率、再热负载、管道增益和损失以及回风静压室。
计算方法
Chvac 使用 CLTD 方法或新的 RTS(辐射时间序列)方法执行冷却计算。 RTS 方法在最新版本的 ASHRAE 基础知识手册中进行了描述,而 CLTD 方法则来自该手册的早期版本。 RTS 方法特别准确,因为它计算过去 24 小时内辐射热增益的延迟效应,以确定当前的冷却负载。 这意味着,例如,该程序会适当考虑外部遮阳设备的效果,该设备在早上为下午高峰期的房间中的窗户遮光。 另一方面,CLTD 方法尽可能使用手册中的精确表值,这意味着您可以手动验证结果。 实际上,您可以针对任何项目在 RTS 和 CLTD 之间来回切换。 要在两种方法之间切换,您所需要做的就是输入屋顶、墙壁和玻璃的等效主数据定义,然后将冷却计算方法输入更改为另一种方法。
产品特点
- 计算峰值热负荷和冷负荷
- 计算加热和冷却 CFM 要求
- 计算跳动和主干管尺寸
- 自动遵守 ASHRAE 标准 62
- 提供整体建筑围护结构报告
- 创建包含计算结果的电子表格文件
- 执行完整的湿度分析
- 打印条形图和分解饼图
- 外部遮阳处理悬垂、鳍片和玻璃倾斜
- 使用精确的 ASHRAE RTS 或 CLTD 程序
- 数百个城市的内置设计天气数据
- 每次计算分析长达 12 个月
- 每个设计日计算 24 小时
- 每个项目允许无限数量的房间
- 房间可分为 100 个空气处理器
- 房间可以选择分组在 VAV 箱下
- 每个房间允许有 100 堵墙、100 扇窗户和 100 个屋顶
- 允许同时渗透和通风
- 允许不同的夏季和冬季空气流量
- 允许每个房间有不同的室内条件
- 允许 20 种主屋顶类型、20 种主墙类型、20 种主隔断类型和 50 种主玻璃类型
- 提供用户定义的自定义材料库
- 提供您最喜欢的材料列表
- 允许多达 10 个内部工作负载配置文件
- 允许 360 度墙壁和玻璃方向
- 允许 Glass 倾斜 0 到 180 度
- 允许屋顶和墙壁颜色效果
- 提供 VAV 和定容系统
- 正确处理回风静压室负载
- 考虑建筑总负荷中的人员多样性
- 计算供应风扇马力和热量增益
- 适用于抽吸式和吹风式风扇
- 如有必要,计算再热要求
- 计算送风管和回风管的增益和损耗
- 允许直接指定供应 CFM 数量
- 允许指定最小送风量
- 仅允许加热、仅冷却或两者都允许
- 多余的送风可作为再加热、储备容量或通过调整离开盘管条件来处理
- 可以用所需的干球温度或相对湿度来指定离开线圈的条件
- 计算冷冻水和热水盘管流量
- 允许经过预处理的外部空气
- 计算热回收通风机 (HRV) 在供暖和制冷方面的优势
- 允许加热和冷却安全系数
- 照明和设备瓦数以及人数可以直接输入或以每平方英尺为基础输入
- 从 ARI/GAMA 数据库中选择设备
- 创建自定义销售提案
- 创建电子表格输出文件
下载
FREQUENTLY ASKED QUESTIONS
CHVAC software calculates cooling loads using either the CLTD (Cooling Load Temperature Difference) method or the RTS (Radiant Time Series) method. The CLTD method is a traditional approach that estimates cooling loads based on temperature differences between indoor and outdoor air, while the RTS method is a more advanced approach that takes into account radiant heat gains and time-series data. The RTS method is considered more accurate, especially for buildings with complex geometries or high internal heat gains.
CHVAC software can generate a variety of reports, including energy audits, load calculations, and system performance reports. These reports provide detailed information on project data, room loads, air handler summary loads, outside air loads, total building loads, building envelope analysis, tonnage requirements, CFM air quantities, chilled water flow rates, and psychrometric data. These reports are essential for HVAC professionals to design, analyze, and optimize HVAC systems.
CHVAC software includes a library of outdoor design weather data for over 2000 cities worldwide. Users can select the nearest city to their project location, and the software will automatically apply the corresponding weather data to the load calculation. Additionally, users can edit the weather data or add data for other cities, allowing for customization to specific project locations. This feature ensures that HVAC systems are designed to operate efficiently under local climate conditions.
ASHRAE Standard 62 is a ventilation standard that provides guidelines for indoor air quality and ventilation rates in commercial buildings. CHVAC software includes an ASHRAE Standard 62 analysis feature, which enables users to evaluate their HVAC system design against the standard’s requirements. This feature helps ensure that the designed system meets the necessary ventilation rates and indoor air quality standards, promoting a healthy and comfortable indoor environment.
CHVAC software includes features to accommodate complex building geometries and orientations, such as tilted glass exterior shading. The software allows users to input detailed information about the building’s architecture, including wall orientations, glass types, and shading devices. This information is then used to accurately calculate cooling loads and energy consumption, ensuring that the designed HVAC system is optimized for the specific building conditions.
While CHVAC software is often used for designing new HVAC systems, it can also be applied to retrofitting and optimizing existing systems. By inputting the existing system’s configuration and operating conditions, users can analyze the system’s performance and identify opportunities for improvement. CHVAC’s comprehensive reporting capabilities and energy calculation features make it an ideal tool for evaluating the potential benefits of retrofitting or optimizing existing HVAC systems.