Fundamentals & Engineering
Direct-to-Chip Liquid Cooling: The Future of High-Density Data Center Thermal Management
Data center power densities have surged to 12-30 kW per rack, making liquid cooling essential. Learn how single-phase and two-phase direct-to-chip systems work, refrigerant selection criteria, and critical design considerations for hoses, tubing, and couplings in modern high-density data centers.
Ductwork Air Flow Balancing
Balancing air systems (ductwork) may be accomplished in various ways. The most common method to accomplish ductwork balancing is Proportional Method. Each diffuser is adjusted to supply the right percentage of total air volume in the ductwork.
Valve Characteristics
Why do we need to be aware of the valve characteristics? Every component in a hydronic system has some level of influence on the control and performance of a hydronic system. Valves are key because they are the controlling devices at the critical areas of heat transfer.
Major Hvac Systems and Equipment
A comprehensive list of all the major HVAC system types and related equipment
Copeland Refrigeration Manuals Download
This is a five series of publications comprising the Emerson Climate Technologies, Inc. Refrigeration Manual. Although each separate part covers a specific area of refrigeration theory and practice, each successive publication presumes a basic understanding of the material presented in the previous sections.
Ice Storage Systems
Thermal energy storage (TES) involves adding heat (thermal) energy to a storage medium, and then removing it from that medium for use at some other time. This may involve storing thermal energy at high temperatures (heat storage) or at low temperatures (cool storage).
Refrigerant Piping Requirements
This guide focuses on systems that use Refrigerant-22 (R-22). While the general requirements are the same for systems that use other refrigerants, velocities and pressure drops will differ.
Life Cycle Cost Analysis Method
The life-cycle cost analysis method is the most commonly accepted method to assess the economic benefits of energy conservation projects over their lifetime. Typically, the method is used to evaluate at least two alternatives of a given project (for instance, evaluate two alternatives for the installation of a new HVAC system: a VAV system or a heat pump system to condition the building). Only one alternative will be selected for implementation based on the economic analysis.
Standards & Compliance
HVAC Ventilation Design: Exhaust Air Ventilation By Rate and ACH
Complete guide to HVAC exhaust air ventilation design using ASHRAE, CIBSE, and Carrier standards covering rate calculations, ACH requirements, and specialized applications for effective contaminant removal and energy efficiency.
HVAC Ventilation Design: Outdoor Air Ventilation By Rate and ACH
Complete guide to HVAC outdoor air ventilation design using ASHRAE, CIBSE, and Carrier standards covering rate calculations, ACH requirements, and building-specific applications for optimal indoor air quality.
HVAC Ventilation Design: Indoor Air Quality and Air Contaminants
Complete guide to HVAC indoor air quality and air contaminant management using ASHRAE, CIBSE standards covering contaminant identification, control strategies, and advanced treatment technologies for healthy indoor environments.
HVAC Ventilation Design: Air Intake Minimum Separation Distance
Complete guide to HVAC air intake minimum separation distances using ASHRAE 62.1 standards covering contamination source requirements, measurement methods, and compliance strategies for optimal outdoor air quality protection.
HVAC Ventilation Design: Air Classifications
Complete guide to HVAC air classifications using ASHRAE 62.1 and CIBSE standards covering air quality categories, contamination levels, filtration requirements, and ventilation strategies for optimal indoor environmental control.
HVAC Ventilation Design: General Schematic and Equations
Complete guide to HVAC ventilation design using ASHRAE 62.1 standards covering calculation procedures, system schematics, and modern ventilation strategies for optimal indoor air quality and energy efficiency.
HVAC Load Estimation: Fouling Factor
Complete guide to fouling factors in HVAC load estimation using Carrier water conditioning standards for accurate heat transfer equipment sizing and comprehensive water quality management strategies.
HVAC Load Estimation: Diversity Factor
Complete guide to diversity factors in HVAC load estimation using CIBSE and Carrier standards for accurate system sizing that reflects realistic building operation patterns and prevents equipment oversizing.
HVAC Load Estimation: Indoor Design Conditions and System Requirements by Building Type
Complete guide to indoor design conditions for HVAC load estimation covering temperature, humidity, air quality, and specialized requirements for residential, commercial, industrial, healthcare, and specialty building applications using ASHRAE, CIBSE, and Carrier standards.
HVAC Load Estimation: Infiltration Heat Gain and Loss
Complete guide to infiltration in HVAC load estimation using ASHRAE, CIBSE, and Carrier standards for accurate assessment of uncontrolled air exchange and its impact on heating and cooling loads.
Digital Tools & Resources
Psychrometric Programming Functions
ibrary of psychrometric functions to calculate thermodynamic properties of air for Python, C, C#, Fortran, JavaScript and VBA/Excel
Carrier Hap Software
Carrier’s Hourly Analysis Program is two powerful tools in one package – versatile features for designing HVAC systems for commercial buildings AND powerful energy analysis capabilities for comparing energy consumption and operating costs of design alternatives.
Trace 700 Software
TRACE 700 enables building designers to optimize the building, system and equipment designs on the basis of energy utilization and life-cycle cost. The Trane software for TRACE 700 facilitates analysis of the energy and economic effects of virtually any chiller plant configuration by allowing users to manipulate a wide range of variables and create a profile of their specific building.
Download EVAP-COND 5.0: The Ultimate Heat Exchanger Simulation Tool for HVAC Engineers
Whether you’re designing a new heat exchanger, optimizing an existing system, or researching alternative refrigerants, EVAP-COND provides the detailed analysis capabilities needed to make informed decisions. I encourage all HVAC engineers and researchers to explore this powerful simulation tool and experience firsthand how it can transform your approach to heat exchanger design.
Heat Transfer Textbook Download
The book is meant for juniors, seniors, and first-year graduate students. And to those who choose to learn the subject on their own, and to practicing engineers who use it as a reference. Whether one studies alone or with a class, learning means posing, then answering, one’s own questions.