Grundlagen & Ingenieurwesen
Direct-to-Chip-Flüssigkeitskühlung: Die Zukunft des Wärmemanagements in Rechenzentren mit hoher Dichte
Die Leistungsdichte von Rechenzentren ist auf 12–30 kW pro Rack gestiegen, was eine Flüssigkeitskühlung unerlässlich macht. Erfahren Sie, wie einphasige und zweiphasige Direct-to-Chip-Systeme funktionieren, welche Kältemittelauswahlkriterien es gibt und welche wichtigen Designüberlegungen für Schläuche, Rohre und Kupplungen in modernen Rechenzentren mit hoher Dichte zu beachten sind.
Kanalluftstromausgleich
Das Ausgleich von Luftsystemen (Kanälen) kann auf verschiedene Weise erreicht werden. Die häufigste Methode, um das Ausgleich von Kanälen zu erreichen, ist eine proportionale Methode. Jeder Diffusor wird angepasst, um den richtigen Prozentsatz des Gesamtluftvolumens in der Kanäle zu liefern.
Ventileigenschaften
Why do we need to be aware of the valve characteristics? Every component in a hydronic system has some level of influence on the control and performance of a hydronic system. Valves are key because they are the controlling devices at the critical areas of heat transfer.
Haupt HLK -Systeme und -ausrüstung
Eine umfassende Liste aller wichtigen HVAC-Systemtypen und zugehörigen Geräte
Copeland Kühlhandbücher herunterladen
Dies ist eine fünf -Reihe von Veröffentlichungen, die das Kühlhandbuch für Kühlung von Emerson Climate Technologies, Inc. umfassen. Obwohl jeder getrennte Teil einen bestimmten Bereich der Kühltheorie und -praxis abdeckt, setzt jede aufeinanderfolgende Veröffentlichung ein grundlegendes Verständnis des in den vorherigen Abschnitten dargestellten Materials voraus.
Eisspeichersysteme
Thermische Energiespeicher (TEs) beinhaltet das Hinzufügen von Wärmeenergie (thermische) Energie zu einem Speichermedium und dann zu einem anderen Zeitpunkt aus diesem Medium. Dies kann das Speichern von Wärmeenergie bei hohen Temperaturen (Wärmespeicher) oder bei niedrigen Temperaturen (Kühllager) beinhalten.
Kältemittel -Rohrleitungsanforderungen
This guide focuses on systems that use Refrigerant-22 (R-22). While the general requirements are the same for systems that use other refrigerants, velocities and pressure drops will differ.
Lebenszykluskostenanalysemethode
The life-cycle cost analysis method is the most commonly accepted method to assess the economic benefits of energy conservation projects over their lifetime. Typically, the method is used to evaluate at least two alternatives of a given project (for instance, evaluate two alternatives for the installation of a new HVAC system: a VAV system or a heat pump system to condition the building). Only one alternative will be selected for implementation based on the economic analysis.
Standards & Compliance
HVAC-Lüftungsdesign: Abluftlüftung nach Rate und ACH
Complete guide to HVAC exhaust air ventilation design using ASHRAE, CIBSE, and Carrier standards covering rate calculations, ACH requirements, and specialized applications for effective contaminant removal and energy efficiency.
HVAC-Lüftungsdesign: Außenluftlüftung nach Rate und ACH
Complete guide to HVAC outdoor air ventilation design using ASHRAE, CIBSE, and Carrier standards covering rate calculations, ACH requirements, and building-specific applications for optimal indoor air quality.
HVAC-Lüftungsdesign: Raumluftqualität und Luftschadstoffe
Complete guide to HVAC indoor air quality and air contaminant management using ASHRAE, CIBSE standards covering contaminant identification, control strategies, and advanced treatment technologies for healthy indoor environments.
HVAC-Lüftungsdesign: Mindestabstand zum Lufteinlass
Complete guide to HVAC air intake minimum separation distances using ASHRAE 62.1 standards covering contamination source requirements, measurement methods, and compliance strategies for optimal outdoor air quality protection.
HVAC-Lüftungsdesign: Luftklassifizierungen
Complete guide to HVAC air classifications using ASHRAE 62.1 and CIBSE standards covering air quality categories, contamination levels, filtration requirements, and ventilation strategies for optimal indoor environmental control.
HVAC-Lüftungsdesign: Allgemeines Schema und Gleichungen
Complete guide to HVAC ventilation design using ASHRAE 62.1 standards covering calculation procedures, system schematics, and modern ventilation strategies for optimal indoor air quality and energy efficiency.
Schätzung der HVAC-Last: Verschmutzungsfaktor
Complete guide to fouling factors in HVAC load estimation using Carrier water conditioning standards for accurate heat transfer equipment sizing and comprehensive water quality management strategies.
Schätzung der HVAC-Last: Diversitätsfaktor
Complete guide to diversity factors in HVAC load estimation using CIBSE and Carrier standards for accurate system sizing that reflects realistic building operation patterns and prevents equipment oversizing.
Schätzung der HVAC-Last: Innenraumgestaltungsbedingungen und Systemanforderungen nach Gebäudetyp
Complete guide to indoor design conditions for HVAC load estimation covering temperature, humidity, air quality, and specialized requirements for residential, commercial, industrial, healthcare, and specialty building applications using ASHRAE, CIBSE, and Carrier standards.
HVAC Load Estimation: Infiltration Heat Gain and Loss
Complete guide to infiltration in HVAC load estimation using ASHRAE, CIBSE, and Carrier standards for accurate assessment of uncontrolled air exchange and its impact on heating and cooling loads.
Digitale Tools und Ressourcen
Belimo SelectPro – Kostenloser Download
Download SelectPro desktop app free. Size and select valves, actuators, and sensors with export builder, quote generator, and centralized reference documents. For HVAC engineers and contractors.
Raten der thermischen Expansion für gemeinsame Rohrmaterialien
Effortlessly calculate rates of thermal expansion for common pipe materials with our interactive calculator. Get accurate data, design insights, and actionable tables for metals and plastics—essential for HVAC engineers, designers, and consultants focused on system reliability and energy efficiency.
HLK -Geräte -Lebenserwartung Taschenrechner
Wir haben einen professionellen Rechner zur Lebenserwartung von HVAC-Geräten erstellt. Die Anwendung bietet umfassende Berechnungen zur Ermittlung der Restnutzungsdauer verschiedener HVAC-Gerätetypen.
BIM -Softwarelösungen für moderne HLK -Anwendungen
Während sich die HLK -Industrie im Jahr 2025 weiterentwickelt, ist die Gebäudeinformationsmodellierung (BIM) zu einem unverzichtbaren Instrument für Fachkräfte geworden, um Design, Installation und Wartungsprozesse zu optimieren. Für HLK -Ingenieure, Auftragnehmer und Techniker kann die Auswahl der richtigen BIM -Software die Projekteffizienz und die Ergebnisse der Projekte erheblich beeinflussen. Lassen Sie uns die effektivsten BIM -Lösungen für HLK -Anwendungen untersuchen.
McQuay Softwares Download
McQuay (As part of Daikin Industries) is one of the largest air conditioning, heating, ventilating and refrigeration companies in the HVAC/R industry. Therefore, we decided to make some softwares that this company has introduced to the industry based on their experience and knowledge available for download.
Bell & Gossett Auswahl Software
#Xylem Bell & Gosset #Selection, #Sizing & #CAD Tools and #Softwares
Daikin Revit-Dateien
DAIKIN APPLIED RESOURCE LIBRARY – REVIT FILES Rooftop Systems Air Handlers – Outdoor Air Cooled Chillers Water Cooled Chillers Fan Coils Self-Contained Water Source Heat Pump Unit Ventilators