Grundlagen & Ingenieurwesen
Kanalluftstromausgleich
Das Ausgleich von Luftsystemen (Kanälen) kann auf verschiedene Weise erreicht werden. Die häufigste Methode, um das Ausgleich von Kanälen zu erreichen, ist eine proportionale Methode. Jeder Diffusor wird angepasst, um den richtigen Prozentsatz des Gesamtluftvolumens in der Kanäle zu liefern.
Ventileigenschaften
Why do we need to be aware of the valve characteristics? Every component in a hydronic system has some level of influence on the control and performance of a hydronic system. Valves are key because they are the controlling devices at the critical areas of heat transfer.
Haupt HLK -Systeme und -ausrüstung
A comprehensive list of all the major HVAC system types and related equipment
Copeland Kühlhandbücher herunterladen
Dies ist eine fünf -Reihe von Veröffentlichungen, die das Kühlhandbuch für Kühlung von Emerson Climate Technologies, Inc. umfassen. Obwohl jeder getrennte Teil einen bestimmten Bereich der Kühltheorie und -praxis abdeckt, setzt jede aufeinanderfolgende Veröffentlichung ein grundlegendes Verständnis des in den vorherigen Abschnitten dargestellten Materials voraus.
Kältemittel -Rohrleitungsanforderungen
This guide focuses on systems that use Refrigerant-22 (R-22). While the general requirements are the same for systems that use other refrigerants, velocities and pressure drops will differ.
Eisspeichersysteme
Thermische Energiespeicher (TEs) beinhaltet das Hinzufügen von Wärmeenergie (thermische) Energie zu einem Speichermedium und dann zu einem anderen Zeitpunkt aus diesem Medium. Dies kann das Speichern von Wärmeenergie bei hohen Temperaturen (Wärmespeicher) oder bei niedrigen Temperaturen (Kühllager) beinhalten.
Lebenszykluskostenanalysemethode
The life-cycle cost analysis method is the most commonly accepted method to assess the economic benefits of energy conservation projects over their lifetime. Typically, the method is used to evaluate at least two alternatives of a given project (for instance, evaluate two alternatives for the installation of a new HVAC system: a VAV system or a heat pump system to condition the building). Only one alternative will be selected for implementation based on the economic analysis.
Berechnung des HVAC-Luftvolumens
Das Luftvolumen für ein HLK -System wird aus der sensiblen Wärme im konditionierten Raum berechnet. Für die typische Heizungs- und Kühleinheit dient die Berechnung zum Abkühlen, da mehr Luft benötigt wird, um einen Raum zu kühlen, als ihn zu erhitzen. Wenn der konditionierte Raum mit einer bestimmten Menge CFM ordnungsgemäß abgekühlt werden kann, kann der Raum mit der gleichen Menge CFM korrekt erhitzt werden.
Standards & Compliance
HVAC Duct Design: Duct Fittings Friction Loss
Complete guide to HVAC duct fittings friction loss using Carrier standards covering loss coefficients, pressure drop calculations, and system optimization for efficient air distribution design.
HLK -Kanaldesign: Dämpfer, Dämpfer und Spulen -Reibungsverlust
Complete guide to HVAC dampers, attenuators, and coils friction loss using SMACNA standards covering pressure drop calculations, component selection, and system optimization for efficient air distribution design.
HLK -Kanaldesign: Kanalrunde bis rechteckig Äquivalent
Complete guide to HVAC round-to-rectangular duct equivalency using ASHRAE standards covering conversion formulas, performance considerations, and system optimization for space-constrained installations.
HLK -Kanal Design: Verlust von Kanalliktion
Complete guide to HVAC duct friction loss calculations using ASHRAE standards covering friction charts, pressure drop analysis, and system optimization for efficient air distribution design.
HLK -Kanalkonstruktion: Klassifizierung der Kanaldruckdruck
Complete guide to HVAC duct pressure classification using SMACNA standards covering pressure class selection, construction requirements, and testing protocols for safe and efficient ductwork systems.
HLK -Kanal Design: Kommerzielle Küchenkanalgröße
Complete guide to commercial kitchen duct sizing using ASHRAE and NFPA standards covering exhaust hood design, grease management, fire safety, and make-up air systems for food service operations.
HVAC Duct Design: Duct Sizing by Velocity & Noise Criteria (NC)
Complete guide to HVAC duct sizing using velocity and noise criteria with ASHRAE and CIBSE standards covering acoustic design, velocity limits, and noise control for sensitive applications.
HVAC Duct Design: Duct Sizing by Equal Friction Method
Complete guide to HVAC duct sizing using the equal friction method with SMACNA and ASHRAE standards covering calculation procedures, friction rate selection, and system optimization for effective air distribution design.
HVAC Duct Design: Duct Sizing SMACNA Recommendations
Complete guide to HVAC duct sizing using SMACNA recommendations covering equal friction, velocity, and static regain methods with design calculations and system optimization for effective air distribution.
Digitale Tools und Ressourcen
Carrier Technical Development Programs (Tdp) Books
Technical Development Programs (TDP) are modules of technical training on HVAC theory, system design, equipment selection and application topics. They are targeted at engineers and designers who wish to develop their knowledge in this field to effectively design, specify, sell or apply HVAC equipment in commercial applications.
Farben der Kältemittelbehälter
Diese Richtlinie ist für die Anleitung der Branche vorgesehen, einschließlich Herstellern, Ingenieuren, Installateuren, Auftragnehmern und Benutzern.
Rhvac – Residential Hvac Loads And Duct Sizes
Rhvac can calculate peak heating and cooling loads (both block and room by room) for residential buildings and some light commercial applications in accordance with ACCA Manual J, D, and S. Rhvac include a complete ACCA Manual D duct sizing capability and a complete Manual S equipment selection.
Kühlbox -Kühlbox Ladungen
Refrig quickly calculates the maximum refrigeration load in btu’s per 24 hour period for all types of refrigeration applications. Refrig has provision for all kinds of loads including: roofs, walls, partitions, floors, products, containers, infiltration, lights, equipment, people, defrost, compressor run-time, and more.
3E Plus Software
NAIMA’s FREE 3E Plus® software program makes it easy to calculate the appropriate insulation thickness necessary for any application. To ensure accuracy, the program has customizable inputs for every aspect of your job—and offers default values if your exact numbers aren’t available.
Kältemittel PH-Diagramm
The pressure-enthalpy diagram (log P/h diagram) is a very useful tool for refrigerant technicians, engineers and researchers. Since it’s not always possible to have all of these diagrams together, we decided to give you this complete pack.
HVACR -Geräte -Lebenserwartung
Below you can see ASHRAE chart of HVAC Equipment Life Expectancy. The chart includes a list of median life expectancy for the following types of equipment: